Purity ≥ 99.95% (UNS R07005 / Grade W-1) – Description, Specifications, Composition, Properties and Applications
1. Product Description
Tungsten wire mesh is the premier ultra-refractory metal woven wire cloth, manufactured from high-purity tungsten wire (purity ≥ 99.95%, Grade W-1 / W-2) on heavy-duty precision weaving looms. Tungsten holds the highest melting point of all known metals at 3410 °C (6170 °F), the lowest coefficient of thermal expansion, the highest tensile strength at temperatures exceeding 1650 °C (3000 °F), and the lowest vapor pressure among metals.
Due to tungsten’s extreme hardness and brittle ductile-to-brittle transition temperature (DBTT), precision weaving requires specially drawn, defect-free, surface-conditioned wires. We supply tungsten wire cloth with bright electrolytic polished finish or black graphite-coated finish in plain weave and twill weave styles.
Under high-temperature vacuum or reducing atmospheres, tungsten wire cloth exhibits extraordinary thermal creep resistance, structural rigidity, and resistance to molten metals. In ambient air, tungsten wire mesh also acts as an exceptional high-density gamma radiation and X-ray shielding material, electromagnetic interference (EMI) shield, and high-frequency light-wave filter.
2. Grades and Designations
| Grade |
UNS Number |
Purity (%) |
Wire Surface |
Typical Characteristics |
| Pure Tungsten W-1 |
R07005 |
≥ 99.95 |
Bright / Cleaned |
High purity, electrolytic bright surface, free of carbon/graphite residues |
| Pure Tungsten W-2 |
R07005 |
≥ 99.90 |
Black (Graphite) |
High tensile as-drawn wire with protective drawing graphite coating |
3. Chemical Composition (wt % per ASTM F288 / GB/T 4181)
| Element |
W |
Fe max |
Ni max |
Mo max |
Si max |
Al max |
C max |
O max |
| Content (%) |
≥ 99.95 |
0.005 |
0.003 |
0.010 |
0.002 |
0.002 |
0.005 |
0.005 |
Tungsten content ≥ 99.95% (exclusive of gas elements). Impurities strictly limited to prevent high-temperature grain boundary sliding.
4. Physical and Mechanical Properties
| Property |
Value |
Unit |
Conditions / Remarks |
| Melting Point |
3410 ± 20 |
°C |
Highest melting point of all metallic elements |
| Boiling Point |
5660 |
°C |
Extremely low vapor pressure |
| Density |
19.25 – 19.30 |
g/cm³ |
Extremely high density (comparable to gold) |
| Tensile Strength (room temp) |
1500 – 3000 |
MPa |
Higher for fine wire; highest tensile strength of any metal |
| Tensile Strength at 1650°C |
approx. 100 – 150 |
MPa |
Retains useful structural strength at extreme heat |
| Modulus of Elasticity |
411 |
GPa |
Highest elastic modulus among common engineering metals |
| Electrical Resistivity |
0.053 – 0.056 |
μΩ·m |
At 20 °C |
| Thermal Conductivity |
173 |
W/(m·K) |
At 20 °C (superb heat conduction) |
| Coefficient of Thermal Expansion |
4.4 – 4.6 |
× 10⁻⁶ / K |
At 20 – 1000 °C (lowest thermal expansion among metals) |
| Max. Continuous Service Temp. |
2400 – 2800 |
°C |
In high vacuum (< 10⁻³ Pa) or pure hydrogen atmospheres |
ENVIRONMENTAL LIMITATION: Like molybdenum, tungsten oxidizes rapidly in air above 400 °C, forming volatile WO₃ above 800 °C. Operation at temperatures > 500 °C requires high vacuum or dry hydrogen / inert gas protection.
5. Key Characteristics
- Highest melting point of all metals (3410 °C) with unparalleled thermal creep rupture strength
- Highest tensile strength among all pure metals, retaining mechanical rigidity up to 2000 °C
- High density (19.25 g/cm³) providing superior X-ray, gamma radiation, and thermal neutron shielding capability
- Extremely low vapor pressure even at 2000 °C, preventing furnace element evaporation and chamber contamination
- Lowest coefficient of thermal expansion among pure metals (4.45 × 10⁻⁶/K), minimizing thermal stress cracking
- Superb resistance to molten alkali metals, zinc, magnesium, and molten glass
- High electrical and thermal conductivity combined with superior electromagnetic shielding effectiveness
6. Wire Mesh Standard Specifications
Tungsten woven wire cloth is available from 2 mesh to 400 mesh per inch, with wire diameters from 0.01 mm to 2.0 mm. Standard specifications are summarized below:
| Mesh Count |
Wire Diameter (mm / in) |
Aperture (mm / in) |
Open Area (%) |
Weave Pattern |
| 10 × 10 |
0.50 mm (0.0197 in) |
2.04 mm (0.0803 in) |
64.5 % |
Plain |
| 20 × 20 |
0.25 mm (0.0098 in) |
1.02 mm (0.0402 in) |
64.5 % |
Plain |
| 30 × 30 |
0.20 mm (0.0079 in) |
0.65 mm (0.0255 in) |
58.4 % |
Plain |
| 40 × 40 |
0.15 mm (0.0059 in) |
0.485 mm (0.0191 in) |
58.4 % |
Plain |
| 60 × 60 |
0.10 mm (0.0039 in) |
0.323 mm (0.0127 in) |
58.4 % |
Plain / Twill |
| 80 × 80 |
0.08 mm (0.0031 in) |
0.237 mm (0.0093 in) |
55.9 % |
Plain / Twill |
| 100 × 100 |
0.05 mm (0.0020 in) |
0.204 mm (0.0080 in) |
64.5 % |
Plain / Twill |
| 150 × 150 |
0.04 mm (0.0016 in) |
0.129 mm (0.0051 in) |
58.4 % |
Twill |
| 200 × 200 |
0.03 mm (0.0012 in) |
0.097 mm (0.0038 in) |
58.4 % |
Twill |
| 300 × 300 |
0.025 mm (0.0010 in) |
0.060 mm (0.0024 in) |
49.8 % |
Twill |
| 400 × 400 |
0.015 mm (0.0006 in) |
0.048 mm (0.0019 in) |
58.4 % |
Twill |
Roll width standard 0.1 m to 2.0 m; roll length 10 m to 100 m. Precision stampings and custom discs available.
| Parameter |
Definition / typical practice |
| Mesh count |
Number of warp (and weft) wires contained in one linear inch of cloth |
| Wire diameter |
Diameter of the individual warp / weft wires, stated in mm or inch |
| Aperture (opening) |
Clear distance between adjacent parallel wires forming one mesh opening, usually stated in mm or micron |
| Open area |
Percentage of the total cloth area that is open; calculated from mesh count and wire diameter |
| Weave type |
Plain weave, twill weave, plain Dutch weave, and twill Dutch weave |
| Supply forms |
Rolls, cut sheets, precision discs, stamps, and fabricated filter elements (cylinders, baskets, porous electrodes) |
| Roll width and length |
Standard width 0.1 m to 1.5 m (up to 2.0 m on request); roll length 10 m to 30 m, or custom cut |
| Edge type |
Selvedge (woven) edge, cut edge, or ultrasonically sealed / reinforced edge |
7. Typical Applications
- Ultra-high temperature vacuum and hydrogen sintering furnaces: heating element mesh, heat treatment baskets, and radiation shields
- Nuclear engineering and medical imaging: high-density X-ray and gamma-ray collimator screens, radiation shielding curtains
- Aerospace and defense: ion thruster acceleration grids, rocket thruster heat filtration, missile thermal barriers
- Chemical and hydrogen generation: ultra-aggressive fluid separation, strong acid/alkali filtration, battery electrodes
- Electromagnetic engineering: high-power RF electromagnetic shielding screens and optical transmission grids
8. Applicable Standards
- ASTM F288: Standard Specification for Tungsten Wire for Electron Devices and Lamps
- ASTM E2016: Standard Specification for Industrial Woven Wire Cloth
- GB/T 4181: Tungsten Wires (Chinese National Standard)
- ISO 9044: Industrial woven wire cloth – Technical requirements and testing
9. Ordering Notes
- Please state metal purity / grade, mesh count, wire diameter, aperture size, weave type, roll width and length, quantity, and required surface finish (bright / chemically cleaned / as-drawn black) when requesting a quotation.
- Where three of the four principal parameters (mesh count, wire diameter, aperture, weave type) are known, the fourth can be calculated and confirmed before order placement.
- Precious metal meshes (Silver, Platinum) and refractory metals (Tungsten, Molybdenum, Niobium) are subject to material price indexing at the time of quotation and order confirmation.
- All data in this datasheet are typical values given for reference only. Final specifications and mechanical / dimensional tolerances are confirmed on the official order acknowledgement.
- Mill test certificates to EN 10204 3.1, chemical assay analysis, third-party inspection, and pre-shipment sample approval can be arranged upon request.
Supplier
Anping County Bolin Metal Wire Mesh Co., Ltd.
Precision woven wire mesh, filter cloth and rare/precious metal wire mesh solutions.
For quotations, custom weaving parameters and technical support, please contact your account manager.