Flexible Stainless Steel Wire Rope Mesh
Product Technical Guide | Description · Specifications · Features · Material · Performance · Applications
1. Product Description
Stainless steel knotted rope mesh is a flexible metal netting manufactured by interweaving stainless steel wire ropes and tying a knot at every point where two ropes cross. The knot locks the ropes against relative movement, so the finished panel behaves as one dimensionally stable structure while remaining completely flexible and foldable.
The raw material is austenitic stainless steel wire rope in AISI 304, 304L, 316 or 316L. Depending on the rope diameter, the rope is built to a 7 × 7 or a 7 × 19 construction. At the standard opening angle of 60° the openings form a regular diamond (rhombic) pattern; other opening angles are available so that transparency and strength can be tuned to the design.
Because the load is carried by continuous ropes rather than by a woven wire cloth, knotted rope mesh combines a very high strength-to-weight ratio with high transparency. It is used wherever an open, visually light surface must also restrain, protect or enclose – balustrades and guardrails, zoo and aviary enclosures, facades, green walls and safety netting.
Compared with ferrule rope mesh of the same rope diameter, knotted rope mesh is the stronger of the two constructions; ferrule rope mesh is the more flexible and the more refined in appearance. The two products are complementary and are frequently combined in one project.
2. Key Features & Characteristics
- High mechanical strength. Every crossing is tied, so the rope cannot slip through the joint. The knotted joint is the strongest standard joint used in flexible rope mesh, and the mesh is the stronger of the two rope mesh types at equal rope diameter.
- Excellent corrosion and weather resistance. Austenitic stainless steel needs no coating and performs indoors, outdoors and in coastal or high-humidity service; 316 / 316L are specified where chloride attack is expected.
- High transparency. The large open area lets daylight and air pass while still forming a physical barrier, giving unobstructed views for visitors and clean sight-lines in architectural work.
- Flexible and foldable. The mesh bends, folds and rolls without loss of strength, so it follows curved, free-form and irregular supports and can be rolled into compact coils for shipping and site handling.
- Long service life, low maintenance. No painting, coating or periodic re-treatment is required; cleaning with water and a mild detergent is normally sufficient.
- Fully made to measure. Rope diameter, mesh opening, opening angle, panel size and panel shape are all specified per project, with edge ropes or edge plates fitted as required.
- Non-combustible. Steel mesh adds no fuel load to the building and produces no toxic smoke.
- Sleek metallic finish. The bright stainless surface suits modern architectural detailing and can be combined with cables, clamps and tensioners from the same material family.
3. Construction & Mesh Geometry
- Rope diameter D – 2 mm (3/64"), 1.6 mm (1/16"), 2.0 mm (5/64"), 2.4 mm (3/32"), 3.2 mm (1/8"), 4.0 mm (5/32").
- Rope construction – 7 × 7 for 1.2–2.4 mm rope; 7 × 19 for 3.2–4.0 mm rope.
- Mesh opening W × H – from 20 × 20 mm up to 120 × 120 mm as standard; other apertures to order.
- Opening angle – 60° standard; 20°, 30°, 70° and 75° also available.
- Joint – a hand-tied knot at every intersection, woven in two rope directions.
- Panel size and shape – made to measure, including curved, tapered and non-rectangular panels.
The opening angle is the angle between the two rope directions at a crossing. At the standard 60° the diamond is close to equilateral, which gives the best balance of strength, transparency and dimensional stability. A smaller angle (20° or 30°) produces a narrower, more elongated diamond and a denser, more closed appearance; a larger angle (70° or 75°) produces a more open, squarer mesh with higher light transmission.
4. Material & Chemical Composition
Wire rope and mesh are produced from austenitic stainless steel, supplied to AISI 304, 304L, 316 and 316L and inspected against ISO/TS 15510:2003. Each production lot is checked before shipment and can be issued with an EN 10204 Type 3.1 mill test certificate on request.
Table 4.1 – Chemical composition (%).
| Grade |
C |
Si |
Mn |
Cr |
Ni |
S |
P |
| 304 |
≤ 0.07 |
≤ 1.0 |
≤ 2.0 |
17.0–19.0 |
8.0–11.0 |
≤ 0.03 |
≤ 0.035 |
| 304L |
≤ 0.03 |
≤ 1.0 |
≤ 2.0 |
17.0–19.0 |
8.0–12.0 |
≤ 0.03 |
≤ 0.035 |
| 316 |
≤ 0.08 |
≤ 1.0 |
≤ 2.0 |
16.0–18.5 |
10.0–14.0 |
≤ 0.03 |
≤ 0.035 |
| 316L |
≤ 0.03 |
≤ 1.0 |
≤ 2.0 |
16.0–18.0 |
12.0–15.0 |
≤ 0.03 |
≤ 0.045 |
- 304 / 304L – general-purpose grade for normal atmospheric, indoor and rural environments. The low-carbon 304L variant limits carbide precipitation and is preferred where welding or heavy forming is involved.
- 316 / 316L – contain 2–3% molybdenum, which forms a denser and more stable passive film. This markedly improves resistance to chloride-ion attack, so 316/316L are selected for coastal, marine, swimming-pool and high-humidity installations, and for applications requiring higher heat resistance.
- Ferrule / knot hardware – the ferrules used to join the ropes, and the edge clamps and tensioning accessories, are made of matching stainless steel so that no dissimilar-metal contact is introduced on site.
5. Standard Specifications
Indicative rope diameter / mesh opening combinations. All combinations outside this range can be produced to order.
| Rope diameter mm (inch) |
Rope structure |
Available mesh opening W × H (mm) |
| 1.2 (3/64") |
7 × 7 |
20 × 20, 25.4 × 25.4, 30 × 30, 38 × 38 |
| 1.6 (1/16") |
7 × 7 |
25.4 × 25.4, 30 × 30, 38 × 38, 51 × 51, 76 × 76 |
| 2.0 (5/64") |
7 × 7 |
38 × 38, 51 × 51, 60 × 60, 76 × 76 |
| 2.4 (3/32") |
7 × 7 |
51 × 51, 60 × 60, 76 × 76, 90 × 90, 102 × 102 |
| 3.2 (1/8") |
7 × 19 |
51 × 51, 76 × 76, 90 × 90, 102 × 102, 120 × 120 |
| 4.0 (5/32") |
7 × 19 |
Available to order |
6. Mechanical Performance & Breaking Load
Because the rope runs continuously through the mesh and the load is transferred at the knots, the load-carrying capacity of a knotted panel is governed by the rope diameter and rope construction. The values below are the minimum breaking forces of the wire ropes used in the mesh.
Table 6.1 – Minimum breaking force of the wire rope.
| Wire rope diameter |
Rope structure |
Minimum breaking force (kN) |
| 1.2 mm (3/64") |
7 × 7 |
1.22 |
| 1.6 mm (1/16") |
7 × 7 |
2.17 |
| 2.0 mm (5/64") |
7 × 7 |
3.17 |
| 2.4 mm (3/32") |
7 × 7 |
4.18 |
| 3.2 mm (1/8") |
7 × 19 |
7.38 |
| 4.0 mm (5/32") |
7 × 19 |
10.7 |
- Panel rated load. The rated breaking load of a finished panel also depends on joint efficiency, the number of ropes carrying the load and the edge termination. Mesh-level values are confirmed by the tensile test report for each production lot.
- Design safety factor. Safety factors for safety-critical installations – balustrades, fall-protection and crowd barriers – are set by the applicable local standard or project specification. Please confirm the required factor before the design is finalised so that the rope diameter can be selected accordingly.
- 7 × 7 versus 7 × 19. 7 × 7 rope is stiffer and holds its shape better; 7 × 19 rope is more flexible and tolerates repeated bending better, which is why it is used for the larger rope diameters.
7. Service Performance & Durability
- Corrosion resistance. 304 / 304L resist atmospheric, fresh-water and rural or urban exposure. 316 / 316L contain molybdenum, which forms a denser and more stable passive film and markedly improves resistance to chloride-ion attack, so they are preferred for coastal, marine, swimming-pool and de-icing-salt environments.
- Weather and UV. The mesh contains no polymer component, so it is not affected by ultraviolet light; transparency and mechanical properties do not degrade with sun exposure.
- Austenitic stainless steel retains its mechanical properties over a wide service temperature range. Continuous service of unstabilised 304 / 316 in the chromium-carbide precipitation range (approximately 425–815 °C) is not recommended; the low-carbon 304L / 316L grades are used where welded assemblies are exposed to elevated temperature.
- Impact behaviour. The mesh is elastic: on impact it deflects and recovers, absorbing energy rather than shattering. Where large deflections are possible, intermediate supports or a tensioned perimeter should be provided.
- Contact and abrasion. Contact with claws, beaks or fur does not damage the stainless surface, but joints and clamps should be inspected periodically in high-contact service such as animal enclosures.
- Non-combustible, adds no fuel load to the building and generates no toxic smoke.
8. Comparison: Knotted vs. Ferrule Rope Mesh
Both constructions share the same flexible diamond opening, the same stainless steel raw material and the same fixing systems. They differ in how the wire ropes are locked together, which drives the strength / flexibility trade-off.
| Aspect |
Knotted Rope Mesh |
Ferrule Rope Mesh |
| Joint method |
Ropes are interwoven and tied with a knot at every intersection |
Ropes are joined at every intersection by a stainless steel ferrule (sleeve) that is hydraulically crimped |
| Relative strength |
Higher: the knot locks the rope against slippage and the assembly is the stronger of the two |
Slightly lower than the knotted type at equal rope diameter |
| Flexibility & appearance |
Less flexible; the knot is visible and reads as a more "textile" surface |
More flexible and more refined in appearance; the ferrule is compact and unobtrusive |
| Assembly |
Hand-knotted – more labour, longer lead time |
Machine-crimped – fast, consistent, highly repeatable |
| Preferred when |
Mechanical strength, animal containment and heavy loading come first |
Visual refinement, tight curvature, complex geometry and fast delivery come first |
9. Typical Applications
- Zoo and wildlife enclosures – large cats, primates, bears, birds and reptiles: high strength with clear sight-lines for visitors.
- Bird aviaries and bird netting – including walk-through aviaries where transparency and light transmission matter.
- Balustrades, handrails and guardrails – atria, stairwells, terraces, mezzanines and car parks.
- Bridge and viaduct balustrade infill panels.
- Building facades and architectural decoration – screens, canopies, sunshades and cladding features.
- Green walls and plant climbing systems – the mesh acts as a climbing trellis and support frame for climbing plants.
- Safety netting – stadium, atrium, helideck and general fall-protection netting.
- Parking structures, ramps and stair cores.
- Sports and leisure facilities – ball-stop and driving-range netting.
- Cable railing and stainless steel rope systems.
10. Ordering & Customization
Every panel is made to measure. Please provide the following parameters when requesting a quotation:
- Required material grade (304, 304L, 316 or 316L).
- Wire rope diameter in mm or inch.
- Mesh opening (aperture) size, and the opening angle if other than the standard 60°.
- Panel width × height, or the total surface area with a project drawing.
- Edge condition: edge rope, edge plate, or plain cut panel.
- Fixing method: clamps, tensioning cables, frames or posts, and whether accessories are required.
- Quantity, destination port and required delivery date.
Tolerances: mesh opening and panel dimensions are subject to the normal manufacturing tolerance for flexible rope mesh. Because the mesh is elastic, panels are quoted with an installation allowance; final dimensions should always be confirmed against the approved shop drawing.
11. Installation, Packaging & Maintenance
Installation
- Panels are supplied pre-formed and cut to size. Because the mesh is elastic, it can be shaped and adjusted on site without loss of strength.
- Fix the panel to the support structure with stainless steel clamps, edge plates or tensioning cables. Fixings should match the mesh grade to avoid galvanic corrosion.
- Tension the panel progressively from the corners towards the middle so that the diamond openings close to their designed 60° opening angle.
- For tall installations, split the height into separate panels and provide intermediate supports so that no single panel carries the full height load.
Packaging
- Knotted rope mesh is flexible and can be folded or rolled, so panels are rolled into coils and packed in cartons or plywood cases. Packing volume is small compared with rigid mesh, which reduces freight cost and site storage space.
Maintenance
- No painting, coating or periodic re-treatment is required.
- Clean with clean water and a mild neutral detergent; for coastal sites rinse periodically to remove salt deposits.
- Inspect joints, clamps and tensioning elements at intervals; re-tension if the panel has been deformed by impact.
- Austenitic stainless steel is non-combustible and contributes no fuel load to a building.
12. Quality Assurance & Inspection
Incoming wire rope is verified for diameter, construction and breaking load before weaving. Finished mesh is inspected lot by lot against the following checkpoints:
- Wire rope diameter and construction (7 × 7 / 7 × 19).
- Mesh aperture and ferrule spacing / knot spacing.
- Panel dimensions, squareness and edge condition.
- Surface condition – no scratches, oil marks, broken wires or burrs.
- Material grade verification by chemical analysis and, where required, a tensile test on the rope.
Documentation available on request: EN 10204 Type 3.1 mill test certificate, dimensional inspection report, packing list and certificate of origin.