Product Datasheet - Description, Specifications, Materials, Performance, Applications and Features
1. Product Description
wire mesh basket is a robust three-dimensional container or filter element fabricated from woven wire cloth, perforated metal plate, expanded metal or a composite combination of these media, mounted to a structural welded wire frame or rolled perimeter rim and left open at the top. In modern industrial processing, wire mesh baskets fulfill two fundamental engineering roles:
- Industrial Filtration Strainer Baskets: Removable, cleanable filter inserts fitted inside simplex, duplex and inline basket strainer housings, bag filter vessels, pump intake pots and pipeline catch-pots. Fluid enters through the open top, contamination is retained on the interior mesh surface, and clean liquid exits through the bottom and sides. The large basket volume acts as a contaminant storage reservoir, delivering exponentially higher dirt-holding capacity and lower pressure drop than flat filter discs before cleaning is required.
- Mesh Frames & Structural Handling Baskets: Rigid, framed wire cloth assemblies designed for component cleaning, degreasing, ultrasonic washing, autoclaving / hospital sterilisation, heat treatment, dipping, pickling, food dehydration, baking and drying racks. In these applications, the structural wire frame, flat bottom grid, stackable corners and ergonomic handles take precedence over micron-level filtration ratings.
Our wire mesh baskets are configured into two prominent operational formats:
- Mesh Frames: Baskets and tray frames constructed with a rigid perimeter frame made of round wire rods (Ø3 - 8 mm), flat metal bars or angle steel, to which woven mesh or expanded metal is welded or crimped. Frames can be rectangular, square or circular, and are designed for high mechanical load-bearing, dimensional flatness, automated conveyor handling and multi-tier vertical stacking.
- Filter Baskets with Integrated Handles: Industrial strainer baskets equipped with heavy-duty lifting handles (folding wire bail handles, rigid cross-bar handles, dual side-mounted drop handles, or threaded lifting eyes). The handles enable rapid, safe manual or hoised extraction of full, contaminant-laden baskets from deep strainer bodies without direct operator contact with process chemicals or hazardous fluids.
Manufactured with automated spot welding, circumferential TIG welding and precise sheet metal stamping in our Anping plant, our baskets feature smooth burr-free surfaces, full-penetration joint welds and certified raw materials suitable for chemical, food-grade and heavy industrial service.
2. Specifications
Baskets and frames are manufactured strictly to customer drawings, equipment housing standards or physical samples. Typical models, handle configurations and structural options are summarised below.
| Basket Category |
Structural Construction |
Handle & Framing Options |
Typical Application Duty |
| Strainer Basket with Handle |
Perforated plate body + woven mesh liner + top sealing flange |
Drop-down wire bail handle or rigid cross-bar handle |
Simplex / duplex pipeline basket strainers, pump intake protection, chemical lines |
| Bag Filter Support Basket |
Heavy perforated cylinder + top collar ring + round bottom |
Fixed internal cross handle or swinging bail handle |
Standard #1 (7"x16") and #2 (7"x32") bag filter housing support cores |
| Rigid Rectangular Mesh Frame |
Heavy wire rod frame (Ø4-8mm) + woven or welded mesh body |
Optional side lifting handles, stackable corner feet, lid |
Ultrasonic parts cleaning, degreasing, autoclaving, food drying & freezing trays |
| Cylindrical Mesh Basket |
Rolled mesh sidewall + reinforced top/bottom rings |
Top overhead bail handle or dual side handles |
Dip-coating, chemical pickling, heat treatment quenching, centrifuge baskets |
| Brewing & Infusion Basket |
Micro-mesh cylinder/box + reinforced frame + bottom support |
Top hook-over kettle handles or hanging brackets |
Craft beer brewing, malt mash separation, cold-brew coffee, herb extraction |
| Espresso Portafilter Basket |
Precision punched / etched micro-pore cup, single/double wall |
Rigid pressed rim for portafilter spring lock |
Commercial and domestic espresso machines (51, 54, 58 mm sizes) |
2.1 Handle and Framing Configurations
| Configuration Item |
Available Options and Descriptions |
| Handle Types |
Swinging wire bail handle (swings flush inside top rim), rigid welded cross-bar handle, dual side drop handles, lifting eye lugs, external hook brackets. |
| Frame Structure |
Round rod perimeter frame (Ø3 - 8 mm), flat bar frame (width 10 - 25 mm x thk 2 - 4 mm), angle iron / stainless angle frame, rolled U-profile channel rim. |
| Bottom Construction |
Flat perforated plate bottom, formed dished mesh bottom, reinforced cross-bar bottom grid, raised stacking feet or runners. |
| Top Rim Sealing Interface |
Machined flat sealing flange, O-ring groove flange, rolled sheet-metal flange collar, or raw framed wire edge. |
| Cover & Lid Options |
Hinged mesh lid with latch, removable drop-on lid with handles, twist-lock perforated cap. |
2.2 Mesh Liner Specifications and Filtration Ratings
| Mesh count (per inch) |
Typical wire diameter (mm) |
Nominal aperture (micron) |
Typical filtration rating |
| 10 |
0.51 |
2,000 |
2,000 micron |
| 20 |
0.25 |
1,000 |
1,000 micron |
| 40 |
0.18-0.20 |
435-450 |
450 micron |
| 60 |
0.15-0.19 |
230-270 |
230-270 micron |
| 80 |
0.112-0.13 |
190-200 |
190-200 micron |
| 100 |
0.10 |
154 |
150 micron |
| 120 |
0.09 |
120-125 |
120 micron |
| 150 |
0.063 |
106 |
105 micron |
| 200 |
0.05-0.056 |
71-77 |
70-75 micron |
| 300 |
0.032-0.04 |
45-52 |
45-50 micron |
| 363 |
0.03-0.04 |
30-40 |
30-40 micron |
Aperture is calculated from mesh count and wire diameter (aperture = 25.4 / mesh count - wire diameter) and is stated as a nominal value. Standard production mesh counts are 40, 60, 80, 100 and 120; finer counts and Dutch weave specifications are produced to order. The filtration rating to be quoted is always confirmed against the drawing, the fluid and the required cleanliness before the order is placed.
2.3 Perforated Plate and Framing Parameters
| Parameter |
Typical Range / Options |
Engineering Remarks |
| Perforated Hole Size |
Ø 1.0 mm to Ø 12.0 mm (round, square or staggered) |
Chosen to provide structural strength and maximum open area (30 - 55%) |
| Perforated Plate Thickness |
1.0 mm to 3.0 mm stainless steel |
Provides pressure-bearing rigidity against basket burst under high differential pressure |
| Frame Rod Diameter |
Ø 3.0 mm to Ø 10.0 mm solid rod |
Forms the load-carrying skeleton for parts cleaning and drying frames |
| Surface Finish |
As-welded, acid pickled & passivated, electropolished |
Pickled & passivated as standard; electropolished for food, brewery and pharma service |
3. Materials of Construction
| Component |
Material & Grade |
Service Suitability & Environmental Notes |
| Mesh Liner & Screen |
Stainless Steel AISI 304 / 304L |
Standard liquid filtration, water treatment, general cleaning, food contact |
| Mesh Liner & Screen |
Stainless Steel AISI 316 / 316L |
Marine pipelines, pharmaceutical processes, corrosive chemicals, brewing acids |
| Mesh Liner & Screen |
Duplex 2205 / 2507, Monel 400, Hastelloy |
Seawater intakes, chemical processing with high chlorides, severe acidic duties |
| Perforated Plate Body |
Stainless Steel 304 / 316L, Carbon Steel |
Heavy-duty structural shell supporting internal or external mesh lining |
| Frame Rods & Handles |
Stainless Steel 304 / 316L Solid Wire & Bar |
Ergonomic lifting handles and rigid outer framework |
| Fasteners & Hinges |
Stainless Steel 304 / 316 |
Corrosion-resistant hardware for hinged lids and removable dividers |
Materials certified to international standards. Mill Test Certificates per EN 10204 Type 3.1 provided with shipment.
4. Performance and Properties
| Property |
Performance Characteristic |
| Filtration Rating |
From 30 micron up to 10 mm depending on mesh liner and perforated backing plate selection. |
| Contaminant Capacity |
Volumetric basket interior stores substantial solids volume, maintaining low initial pressure drop (< 0.02 MPa). |
| Mechanical Rigidity |
Welded framework and heavy perforated plate withstand high differential pressure (> 0.5 - 2.0 MPa) without collapse. |
| Safe Handling |
Heavy-duty integrated handles allow operators to safely lift, carry and tip heavy, contaminant-filled baskets. |
| Corrosion & Heat Resistance |
All-stainless construction operates continuously up to 480 degC and withstands repetitive chemical, steam and acid cleaning. |
| Cleanability & Longevity |
Completely reusable; empty solids and wash with pressure hose, ultrasonic bath or chemical immersion. |
5. Applications
| Industry / Field |
Specific Application & Service Duty |
| Pipeline Filtration & Strainers |
Simplex and duplex basket strainers on crude oil, fuel, cooling water, chemical and steam lines. |
| Bag Filter Housings |
Internal perforated support baskets for size #1 and size #2 liquid filter bag systems. |
| Parts Cleaning & Degreasing |
Ultrasonic cleaning baskets, solvent degreasing mesh frames, electroplating dipping baskets. |
| Medical & Pharmaceutical |
Surgical instrument sterilisation trays, autoclave mesh baskets, clean-room component carriers. |
| Food, Brewing & Beverage |
Brewery mash hop baskets, fruit juice pulp strainers, deep-frying baskets, blanching mesh frames. |
| Heat Treating & Metallurgy |
Component quenching baskets, furnace annealing trays, shot-blasting parts containers. |
6. Key Features
- Dual Functional Scope: High-efficiency pipeline Strainer Baskets and heavy-duty structural Mesh Frames manufactured under one roof.
- Ergonomic Lifting Handles: Drop-down wire bail handles, rigid cross-bars and side handles designed for safe, effortless servicing.
- Composite High-Strength Build: Precision woven mesh liner joined to heavy perforated plate shell for maximum pressure retention.
- Huge Dirt-Holding Volume: Extended cylindrical and rectangular cavities hold large volumes of solids between cleanings.
- 100% Reusable & Cleanable: Zero ongoing disposable cartridge cost; rapid turnaround via backwash, steam or ultrasonic tank.
- Hygienic & Sanitary Finishing: Smooth welds, deburred edges, acid-pickled or electropolished surfaces compliant with food/pharma standards.
- Custom Tailored Fabrication: Sized to fit any existing strainer housing, bag filter vessel or cleaning tank to exact drawings.
7. Ordering Information
Please supply the following parameters when inquiring or ordering:
- Product type and configuration (see the specification tables in this datasheet).
- Material and grade of the wire cloth, and of any rim, frame, handle or support component.
- Mesh count together with wire diameter, or the required filtration rating in micron, and whether nominal or absolute retention is required.
- Edge treatment: rimmed / edge-wrapped (specify rim profile: vertical or flat; specify rim material: aluminium, stainless steel or brass), non-rimmed (plain trimmed / cut edge), or spot-welded perimeter.
- Layer construction: single layer, 2-layer spot-welded, multi-layer spot-welded, or multi-layer rimmed with perforated backing plate.
- Dimensions: outside diameter, inside diameter, depth, wall / frame thickness, and any shape drawing for irregular / custom-contoured parts.
- Operating conditions: process medium, operating temperature, operating pressure and allowable pressure drop.
- Cleaning method and expected service frequency, plus required certification (e.g. EN 10204 3.1 material certificate).
8. Supplier
Anping County Bolin Metal Wire Mesh Co., Ltd.
Address: NO15, Building 1, B Zone, Wire Mesh World, Anping County, Hengshui City, Hebei Province, China 053600
Tel: 86-0318-5280116 Fax: 86-0318-7020860 Mobile / WhatsApp: +86-170 6528 1888
Website: www.metalmeshfilters.com www.bolinmetalmesh.com
Established 2004 | ISO 9001:2015 | Wire mesh manufacturing for more than 20 years