Product Datasheet - Description, Specifications, Materials, Performance, Applications and Features
1. Product Description
A wire mesh filter tube (also referred to as a mesh cylinder, filter cartridge core, tubular strainer or cylindrical screen) is a rigid or semi-rigid tubular filter element manufactured by rolling precision woven wire cloth, perforated metal plate, expanded metal or sintered mesh into a cylinder and closing the longitudinal seam by plasma welding, TIG welding, seam welding, spot welding or mechanical lock seaming.
Depending on process demands, filter tubes are produced in multiple structural configurations: single-layer woven mesh cylinders, multi-layer composite tubes with internal or external perforated support cores, pleated mesh cylinders for maximised filtration surface area, and heavy-duty wedge wire screen tubes. Both ends can be left open, capped with stamped end caps, fitted with threaded connectors (NPT / BSP), or equipped with standard flanged or sanitary tri-clamp fittings.
Filter tubes provide efficient inside-out or outside-in filtration in continuous liquid, gas and steam lines, serving as protective filter cores in inline strainers, hydraulic suction/return lines, water treatment vessels, chemical reactor feed lines and pump intake screens. All welding and assembly are carried out in-house with automated circumferential and longitudinal welding equipment, ensuring full weld penetration, smooth seams and tight dimensional concentricity.
2. Specifications
Filter tubes and cylinders are manufactured strictly to customer drawings, specifications or physical samples. Typical structural types, end configurations and mesh options are summarised below.
| Construction Type |
Structural Composition |
Typical Service Duty |
| Single-Layer Mesh Tube |
Single layer of woven wire cloth rolled and welded / lock-seamed |
Low differential pressure fluid screening, breather tubes, pump intake strainers |
| Mesh Tube + Perforated Core |
Woven wire cloth liner supported inside or outside by a heavy perforated metal tube |
Standard industrial liquid and oil filtration; high dP and backwash resistance |
| Multi-Layer Sintered Tube |
Multi-layer sintered wire mesh rolled and seam-welded into rigid porous tube |
High-temperature, high-pressure gas/liquid filtration; catalyst recovery, polymer lines |
| Pleated Wire Mesh Cylinder |
Pleated woven or sintered mesh pack mounted around perforated central core |
High-flow, extended-area cartridge filtration; hydraulic and lube oil systems |
| Wedge Wire Screen Cylinder |
V-shaped profile wire helically wound and resistance-welded to axial support rods |
Heavy-duty slotted intake screens, resin traps, rotary drum screens, water well filtration |
| Perforated-Only Tube |
Rolled and seam-welded perforated sheet with round, square or slotted holes |
Coarse strainers, exhaust silencer cores, internal support cores for disposable media |
2.1 End Forms and Connection Options
| End Configuration |
Available Options and Descriptions |
| Both Ends Open (DOE) |
Both ends plain cut, square ground, deburred, or finished with rolled reinforcement rings. |
| End Caps Fitted |
Stamped or machined metal end caps (open or blind/closed) welded, bonded or crimped to tube ends. |
| Threaded Connectors |
Male or female NPT, BSP, metric or customised machine threads welded to one or both ends. |
| Flanged Connections |
Standard ANSI / DIN / JIS pipe flanges, slip-on collars, or custom rectangular / oval bolting flanges. |
| Sanitary Tri-Clamp |
Precision-machined sanitary ferrule ends (DIN 32676 / ISO 2852) for food, beverage and pharmaceutical use. |
| Handle / Pull Bar |
Integrated fixed or folding wire handles welded across the top open end for easy extraction from housings. |
2.2 Mesh Specifications and Filtration Ratings
| Mesh count (per inch) |
Typical wire diameter (mm) |
Nominal aperture (micron) |
Typical filtration rating |
| 10 |
0.51 |
2,000 |
2,000 micron |
| 20 |
0.25 |
1,000 |
1,000 micron |
| 40 |
0.18-0.20 |
435-450 |
450 micron |
| 60 |
0.15-0.19 |
230-270 |
230-270 micron |
| 80 |
0.112-0.13 |
190-200 |
190-200 micron |
| 100 |
0.10 |
154 |
150 micron |
| 120 |
0.09 |
120-125 |
120 micron |
| 150 |
0.063 |
106 |
105 micron |
| 200 |
0.05-0.056 |
71-77 |
70-75 micron |
| 300 |
0.032-0.04 |
45-52 |
45-50 micron |
| 363 |
0.03-0.04 |
30-40 |
30-40 micron |
Aperture is calculated from mesh count and wire diameter (aperture = 25.4 / mesh count - wire diameter) and is stated as a nominal value. Standard production mesh counts are 40, 60, 80, 100 and 120; finer counts and Dutch weave specifications are produced to order. The filtration rating to be quoted is always confirmed against the drawing, the fluid and the required cleanliness before the order is placed.
3. Materials of Construction
| Component |
Material & Grade |
Service Suitability & Environmental Notes |
| Filter Mesh & Liner |
Stainless Steel AISI 304, 304L, 316, 316L, 321 |
General industrial fluids, steam, potable water, food contact, chemical pipelines |
| Filter Mesh & Liner |
Duplex 2205 / Super Duplex 2507 |
Chloride-bearing water, marine and offshore systems, aggressive acidic duties |
| Filter Mesh & Liner |
Monel 400, Inconel 600/625, Hastelloy C-276 |
Seawater, hot sour gas, concentrated hydrochloric/hydrofluoric acids, high-temp flue gas |
| Filter Mesh & Liner |
Titanium Gr1 / Gr2 |
Chlor-alkali plants, marine aquaculture, high-purity medical and aerospace circuits |
| Perforated Core Tube |
Stainless Steel 304, 316L, Carbon Steel, Galvanised |
Structural support core resisting external collapse or internal burst pressure |
| End Caps & Fittings |
Stainless Steel 304, 316L, Brass, Aluminium |
Welded or crimped mounting interfaces, matched in grade to the filter media |
Certified raw materials; Mill Test Certificates per EN 10204 3.1 supplied with shipment.
4. Performance and Properties
| Property |
Performance Characteristic |
| Filtration Rating |
From 1 micron (sintered tube) up to 5,000 micron (coarse mesh/perforated tube). |
| Operating Temperature |
Stainless steel up to 480 degC (continuous); high-temperature alloys up to 800 - 1,000 degC. |
| Collapse & Burst Strength |
Perforated core-backed tubes resist > 2.0 - 5.0 MPa differential pressure without structural deformation. |
| Flow Permeability |
High open area and straight-through cylindrical geometry minimise pressure drop across full length. |
| Weld Seam Integrity |
Automated longitudinal TIG/plasma welding delivers 100% penetration, crack-free and fully leak-tested seams. |
| Cleanability & Regeneration |
Easily backwashed in-situ with reverse fluid flow, ultrasonic bath cleaning, solvent soaking or steam flushing. |
5. Applications
| Industry / Field |
Typical Duty & Equipment |
| Water Treatment & Desalination |
Pre-filtration cores for RO membranes, raw water intake strainers, backwash well screens. |
| Oil, Gas & Petrochemical |
Fuel and lube oil pipeline strainers, natural gas burner nozzles, catalyst recovery filters, pipeline pigging strainers. |
| Chemical & Polymer Processing |
Viscous resin straining, chemical reaction vessel inline filters, acid/alkali circulation pipeline cores. |
| Hydraulics & Power Plants |
Hydraulic fluid suction strainers, turbine oil conditioning cartridges, boiler feed-water filters. |
| Food, Beverage & Dairy |
Beer wort filtration, dairy processing inline sanitary strainers, juice pulp separators, syrup clarifiers. |
| General Industrial Equipment |
Air compressor intake filters, vacuum pump exhaust cores, paint and coating line tubular filters. |
6. Key Features
- Robust All-Metal Welded Construction: Longitudinal seams TIG or plasma welded for maximum mechanical durability under pulsing flow.
- High Collapse Resistance: Perforated and wedge wire support cores carry heavy differential pressures without collapse.
- Flexible End Fitting Integration: Plain ends, stamped caps, threaded nipples, flanges and sanitary tri-clamps engineered to order.
- Permanent & Washable: Eliminates recurring cartridge disposal costs; fully regenerable through backwash, steam and ultrasonic cleaning.
- Wide Material Spectrum: 304, 316L, 321, duplex, Monel, Inconel, Hastelloy and titanium.
- Precision Custom Sizing: Diameters from 10 mm to over 1,000 mm, lengths from 20 mm to 3,000 mm produced to drawing.
7. Ordering Information
Please supply the following parameters when inquiring or ordering:
- Product type and configuration (see the specification tables in this datasheet).
- Material and grade of the wire cloth, and of any rim, frame, handle or support component.
- Mesh count together with wire diameter, or the required filtration rating in micron, and whether nominal or absolute retention is required.
- Edge treatment: rimmed / edge-wrapped (specify rim profile: vertical or flat; specify rim material: aluminium, stainless steel or brass), non-rimmed (plain trimmed / cut edge), or spot-welded perimeter.
- Layer construction: single layer, 2-layer spot-welded, multi-layer spot-welded, or multi-layer rimmed with perforated backing plate.
- Dimensions: outside diameter, inside diameter, depth, wall / frame thickness, and any shape drawing for irregular / custom-contoured parts.
- Operating conditions: process medium, operating temperature, operating pressure and allowable pressure drop.
- Cleaning method and expected service frequency, plus required certification (e.g. EN 10204 3.1 material certificate).
8. Supplier
Anping County Bolin Metal Wire Mesh Co., Ltd.
Address: NO15, Building 1, B Zone, Wire Mesh World, Anping County, Hengshui City, Hebei Province, China 053600
Tel: 86-0318-5280116 Fax: 86-0318-7020860 Mobile / WhatsApp: +86-170 6528 1888
Website: www.metalmeshfilters.com www.bolinmetalmesh.com
Established 2004 | ISO 9001:2015 | Wire mesh manufacturing for more than 20 years