Product Datasheet - Description, Specifications, Materials, Performance, Applications and Features
1. Product Description
A wire mesh filter disc is a high-precision, flat circular, annular or custom-contoured filtration element manufactured from precision woven wire cloth, expanded metal or sintered wire mesh. In global filtration engineering, filter discs are supplied in both single-layer and composite multi-layer structures, with engineered edge treatments designed to seal, locate and retain filter packs under heavy operational pressure differentials.
Our wire mesh filter disc range is structured into the following distinct structural types:
- Rimmed / Edge-Wrapped Discs : Discs bound with a continuous rolled or stamped metal channel strip around the outer perimeter (and inner perimeter for annular discs). Rim materials include Brass (H62/H65 - ductile sealing, anti-galling, excellent heat conduction in extruder barrels), Stainless Steel 304 / 316 / 316L (maximum corrosion resistance, sanitary compliance, high pressure capability), and Aluminium (lightweight, soft sealing against machined surfaces, highly cost-effective). Edge-wrapping seals all cut wire ends, prevents edge fraying, eliminates downstream wire loss, and forms a defined mechanical gasket shoulder.
- Non-Rimmed Discs: Single-layer or multi-layer mesh cut precisely to outer dimensions via laser cutting, high-speed stamping or ultrasonic slitting without a perimeter metal band. Non-rimmed discs offer maximum effective filtration area right to the outer edge, lowest unit cost, and optimal stacking flexibility inside screen changer cavities.
- 2-Layer Spot-Welded Discs: A composite disc assembled from two distinct mesh layers - typically one fine filtration layer (e.g. 100 - 300 mesh) joined to a coarser support/drainage mesh (e.g. 20 - 40 mesh) - by precision spot welding around the perimeter or in a central matrix pattern. Spot welding prevents layer separation during handling and installation while avoiding the added thickness of an edge rim.
- Multi-Layer Spot-Welded Discs: Robust filter packs formed by spot-welding 3, 4, 5 or more mesh layers into a permanent unified disc. The layer structure follows a progressive filtration gradient (e.g. coarse protective mesh -> intermediate drainage mesh -> fine retention layer -> coarse downstream support), delivering high mechanical rigidity against flow surge and back-pressure.
- Multi-Layer Rimmed Discs : High-specification heavy-duty filter packs combining 3 to 7 layers of wire cloth and/or perforated metal backing plates, permanently enclosed inside a stamped U-section metal rim (Aluminium, Stainless Steel or Brass). This provides maximum burst strength, flat sealing faces and safe handling for heavy polymer melt and oil filtration.
- Irregular / Shaped Discs: Non-circular custom filter plates manufactured to engineering drawings, including rectangular, square, oval, kidney-shaped, semi-circular, polygon, segmented or central-hole notched discs, available in both rimmed and spot-welded executions.
A dedicated, internationally standardised product category within our disc range is the SPL / DPL Mesh-Type Oil Filter Disc (SPL / DPL ):
- SPL / DPL filter discs are dedicated standardised components built with fixed dimensions, standardised mounting bores and rated flow capacities according to heavy-machinery standards (including former Ministry of Machinery standard JB/T 7370 and Sinopec/marine engineering standards).
- SPL denotes duplex (twin-bowl) filter assemblies where one bowl can be switched, isolated and cleaned without interrupting system operation; DPL denotes simplex (single-bowl) filter units.
- Each SPL/DPL disc is a precision multi-layer rimmed annular disc (consisting of 4 layers of wire cloth plus a perforated metal support core, enclosed by an aluminium or stainless steel rim), designed to slide onto a central splined / perforated mandrel tube with internal spring compression, operating at working pressures up to 0.8 MPa and temperatures up to 95 degC in marine diesel engines, steam turbines, rolling mill lubrication systems and heavy hydraulic power packs.
2. Specifications
The tables below outline structural classifications, standard SPL/DPL models, technical parameters and mesh specifications.
| Classification |
Edge / Joining Technique |
Layer Combination |
Rim / Edge Material |
Typical Engineering Duty |
| Rimmed Disc (包边片) |
U-section crimped rim |
1 to 5 layers |
Aluminium, Stainless Steel, Brass |
Polymer extrusion screen packs, pipeline flange filters, oil filtration |
| Non-Rimmed Disc (不包边片) |
Laser cut / stamped plain edge |
Single or stacked layers |
N/A (clean-cut edge) |
Extruder breaker plate screen packs, lab filtration, punch-fit gaskets |
| 2-Layer Spot-Welded (双层点焊) |
Precision perimeter spot welds |
2 layers (fine + coarse) |
N/A (welded mesh) |
Oil/gas filtration, resin strainers, dual-stage protective discs |
| Multi-Layer Spot-Welded |
Multipoint matrix spot welding |
3 - 7 layers progressive |
N/A (welded pack) |
High-viscosity melt filtration, rubber reclaim, blow moulding screens |
| Multi-Layer Rimmed |
Heavy-duty stamped rim wrap |
3 - 7 layers + perf plate |
Aluminium, Stainless Steel, Brass |
SPL/DPL oil filters, heavy-duty screen changers, high dP melt lines |
| Irregular / Shaped |
Laser cut / custom rim / spot-weld |
Single or multi-layer |
Al, SS, Brass, or plain |
Custom valve bodies, oval manifold cavities, irregular pump ports |
| SPL / DPL Standard Disc |
Standardised annular rimmed disc |
4 mesh layers + perf core |
Aluminium, Stainless Steel 304 |
Standard marine/industrial lube oil filters, turbine oil systems |
2.1 Standard SPL / DPL Filter Disc Sizes and Flow Ratings
SPL denotes duplex switchable oil filters; DPL denotes simplex units. Disc dimensions are standardised by nominal bore (DN), rated throughput and exact inside/outside diameters:
| SPL Model |
DPL Model |
Nominal Bore DN (mm) |
Rated Flow (L/min) |
Disc Inside Dia. (mm) |
Disc Outside Dia. (mm) |
| SPL-15 |
- |
15 |
33.4 |
20 |
40 |
| SPL-25 |
DPL-25 |
25 |
83.4 |
30 |
65 |
| SPL-32 |
- |
32 |
134 |
30 |
65 |
| SPL-40 |
DPL-40 |
40 |
200 |
45 |
90 |
| SPL-50 |
- |
50 |
334 |
60 |
125 |
| SPL-65 |
DPL-65 |
65 |
500 |
30 |
65 |
| SPL-80 |
DPL-80 |
80 |
834 |
70 |
155 |
| SPL-100 |
- |
100 |
1,334 |
70 |
155 |
| SPL-125 |
- |
125 |
2,000 |
90 |
175 |
| SPL-150 |
DPL-150 |
150 |
3,000 |
90 |
175 |
| SPL-200 |
DPL-200 |
200 |
5,334 |
90 |
175 |
The most commonly specified SPL disc sizes are 40x20, 65x30, 90x45, 125x60, 155x70 and 175x90 mm (OD x ID). Quoted per piece; please specify quantity and whether aluminium or stainless steel rim is required.
2.2 General Technical Parameters
| Parameter |
Specification Standard |
| Filter Medium |
Stainless steel plain/twill weave cloth (304, 316, 316L), phosphor bronze cloth, brass cloth, stainless steel Dutch weave cloth. |
| Layer Structure |
Single layer; 2-layer spot-welded; multi-layer spot-welded (3-7 layers); multi-layer rimmed with perforated support plate. |
| Rim Material Options |
Aluminium strip (standard for SPL/DPL), Stainless Steel 304/316L (high strength & corrosive duty), Brass H62/H65 (extrusion/heat transfer). |
| Shape Variants |
Circular, annular (washer/donut), oval, rectangular, square, kidney, segmented, or complex irregular geometries to CAD drawings. |
| Filtration Rating |
5 to 1,000 micron; standard production range 10, 20, 40, 65, 80, 100, 120, 150, 200 micron. |
| Working Pressure (SPL/DPL) |
0.8 MPa (8 bar); proof pressure 1.2 MPa. |
| Initial Pressure Drop |
Less than or equal to 0.015 MPa (clean element at rated flow and viscosity). |
| Working Temperature |
Standard SPL/DPL: up to 95 degC; all-stainless steel discs: up to 480 degC (continuous). |
| Process Medium |
Mineral lubricating oils, turbine oils, fuel oils, hydraulic fluids, polymer melts, solvents, water, edible oils. |
2.3 Mesh Specifications and Filtration Ratings
| Mesh count (per inch) |
Typical wire diameter (mm) |
Nominal aperture (micron) |
Typical filtration rating |
| 10 |
0.51 |
2,000 |
2,000 micron |
| 20 |
0.25 |
1,000 |
1,000 micron |
| 40 |
0.18-0.20 |
435-450 |
450 micron |
| 60 |
0.15-0.19 |
230-270 |
230-270 micron |
| 80 |
0.112-0.13 |
190-200 |
190-200 micron |
| 100 |
0.10 |
154 |
150 micron |
| 120 |
0.09 |
120-125 |
120 micron |
| 150 |
0.063 |
106 |
105 micron |
| 200 |
0.05-0.056 |
71-77 |
70-75 micron |
| 300 |
0.032-0.04 |
45-52 |
45-50 micron |
| 363 |
0.03-0.04 |
30-40 |
30-40 micron |
Aperture is calculated from mesh count and wire diameter (aperture = 25.4 / mesh count - wire diameter) and is stated as a nominal value. Standard production mesh counts are 40, 60, 80, 100 and 120; finer counts and Dutch weave specifications are produced to order. The filtration rating to be quoted is always confirmed against the drawing, the fluid and the required cleanliness before the order is placed.
3. Materials of Construction
| Component |
Material & Grade |
Service Suitability & Environmental Notes |
| Filter Cloth |
Stainless Steel AISI 304 / 304L |
General lubrication, fuel oil, hydraulic circuits, water, plastics extrusion |
| Filter Cloth |
Stainless Steel AISI 316 / 316L |
Marine environment, acid-washing circuits, synthetic lubricants, food & pharmaceutical contact |
| Filter Cloth |
Phosphor Bronze & Brass |
Fuel and oil circuits, non-sparking applications, anti-galling properties against steel mandrels |
| Support Core Plate |
Perforated Stainless Steel or Aluminium Sheet |
Internal pressure-bearing core for SPL/DPL and multi-layer rimmed discs |
| Rim / Edge Band |
Aluminium (1060 / 3003) |
Standard rim for SPL/DPL discs; soft ductile seal against filter housing spacers |
| Rim / Edge Band |
Stainless Steel AISI 304 / 316L |
Heavy-duty chemical, marine, high-pressure and food-grade rim requirements |
| Rim / Edge Band |
Brass (H62 / H65) |
Excellent heat conduction in plastics extrusion barrels; prevents galling in sliding screen changers |
All alloys comply with international standards. EN 10204 Type 3.1 Material Test Reports are issued per production lot.
4. Performance and Properties
| Performance Characteristic |
Engineering Feature & Operational Value |
| Filtration Precision |
Strictly controlled aperture distribution ensures sharp, repeatable particle cut-off from 5 to 500 micron. |
| Differential Pressure Capacity |
Multi-layer spot-welded and rimmed discs withstand high differential pressure (> 2.5 MPa in polymer melt lines) without layer delamination or blow-through. |
| High Dirt-Holding & Low dP |
Engineered coarse support layers provide open drainage channels beneath the fine filtration mesh, minimising flow resistance. |
| Complete Cleanability |
100% metal construction allows indefinite regeneration via ultrasonic washing, counter-flow liquid backwash, solvent bath or pyrolysis baking ovens. |
| Zero Media Migration |
Rimmed designs securely lock wire ends inside the metal U-channel; spot-welded designs fuse loose perimeter wires, guaranteeing clean effluent. |
| Thermal Stability |
Operates reliably in severe temperature regimes from cryogenic -200 degC up to +480 degC (stainless steel), unaffected by thermal cycling. |
5. Applications
| Industry / Field |
Application Duty & Equipment Types |
| Marine & Power Generation |
Main engine lubrication oil filters, reduction gearbox lube systems, steam/gas turbine bearing oil (SPL & DPL series). |
| Plastics & Rubber Extrusion |
Continuous screen changers, breaker plate screen packs, blown film, masterbatch extrusion, pelletising lines. |
| Chemical Fiber & Polymer |
Spinning pack filtration for polyester, nylon and viscose; polymer melt dope straining. |
| Hydraulics & Heavy Machinery |
Mining equipment, rolling mill lubrication units, high-pressure hydraulic return-line filter stacks. |
| Food, Beverage & Brewing |
Edible oil refining, sugar syrup clarifiers, espresso machine puck screens, hop filtration. |
| Custom Equipment & Valves |
Irregular shaped filter plates in specialised manifolds, pumps, flow meters, compressors and pipeline check valves. |
6. Key Features
- Exhaustive Product Variety: Rimmed, Non-Rimmed, 2-Layer Spot-Welded, Multi-Layer Spot-Welded, Multi-Layer Rimmed and Irregular Shaped Discs.
- Diverse Rim Metallurgy: Premium edge-wrapping in Brass, Stainless Steel or Aluminium to suit mechanical, thermal and chemical requirements.
- Dedicated SPL / DPL Range: Complete standardised replacement disc models for marine and industrial duplex/simplex oil filters.
- Precise Custom Shaping: High-precision laser cutting and stamping dies deliver complex irregular geometries with tight tolerances (+/-0.05 mm).
- Burst & Delamination Proof: Multipoint projection welding and mechanical rimming ensure zero layer separation under extreme pressure surges.
- Infinite Cleanability: Reusable all-metal elements drastically cut operating costs and hazardous waste compared to disposable cartridges.
- Direct Factory Sourcing: Woven, cut, welded and rimmed in our own Anping factory under strict ISO 9001:2015 quality control.
7. Ordering Information
Please supply the following parameters when inquiring or ordering:
- Product type and configuration (see the specification tables in this datasheet).
- Material and grade of the wire cloth, and of any rim, frame, handle or support component.
- Mesh count together with wire diameter, or the required filtration rating in micron, and whether nominal or absolute retention is required.
- Edge treatment: rimmed / edge-wrapped (specify rim profile: vertical or flat; specify rim material: aluminium, stainless steel or brass), non-rimmed (plain trimmed / cut edge), or spot-welded perimeter.
- Layer construction: single layer, 2-layer spot-welded, multi-layer spot-welded, or multi-layer rimmed with perforated backing plate.
- Dimensions: outside diameter, inside diameter, depth, wall / frame thickness, and any shape drawing for irregular / custom-contoured parts.
- Operating conditions: process medium, operating temperature, operating pressure and allowable pressure drop.
- Cleaning method and expected service frequency, plus required certification (e.g. EN 10204 3.1 material certificate).
8. Supplier
Anping County Bolin Metal Wire Mesh Co., Ltd.
Address: NO15, Building 1, B Zone, Wire Mesh World, Anping County, Hengshui City, Hebei Province, China 053600
Tel: 86-0318-5280116 Fax: 86-0318-7020860 Mobile / WhatsApp: +86-170 6528 1888
Website: www.metalmeshfilters.com www.bolinmetalmesh.com
Established 2004 | ISO 9001:2015 | Wire mesh manufacturing for more than 20 years